Mortar AnalysisBrick Repair Mortars
@AlamoMasonryRepair.com 

     Home  |   Brick Repair Products   |   Services   |   Mortar Matching   |  Articles  |  Site Map

 

Alamo Masonry Repair

We Fix Cheap Brick Repair!

Serving Dallas-Ft. Worth (DFW) and community

214-295-4742

Click Here to Contact Us: masonry tuckpointing services

 

How Much Does Brick Repair Cost?

Click here to view our Price Sheet.

If you are interested in mortar analysis, custom bags of mortar, and other brick repair products or books, visit MortarLab.com.


Contact Us or Make a Payment

Masonry Repair

This is the most common question we are asked. In order to answer this question, we must tell you a little about masonry repair.

When preparing to repair masonry mortars and cracks, the mortar used for repair must match the original mortar. While this sounds easy enough, it is far more challenging than you might expect. Matching to an original mortar can only be done through extensive mortar testing performed by a qualified mortar testing lab. The testing lab must be able to test hardened mortars to determine their composition and mortar type. If the mortar type is not matched, the new mortar can cause further damage or not bond into the mortar joints of your wall.

This is why the official guidelines of masonry restoration specify the need for mortar analysis and matching, and that it is done through compliance with certain ASTM testing standards.

As these are the regulated guidelines of the industry, they would carry over into inclusion with the sale of any repaired property. Should a repair be performed that doesn't properly match and/or without the report from a testing lab specifying an appropriate repair mortar, the seller of such a property could likely be forced to re-purchase the property.

For all of these reasons, mortar testing is required before any repair can be performed to the masonry. You will notice the AMR Mortar Testing Labs logo proudly displayed on our site as they provide the most complete analysis and most usable information of any testing lab we have used.

The cost of mortar analysis is $350.00 and then the color match is $150.00 making a total of $500.00 for the tests alone. Then there is the purchase of materials and job costs. AMR Labs produces bags of custom mortar at a cost of $60.00 per box. The average repair project uses 2-6 boxes of custom mortar. If your project is small, you are looking at an additional $120.00 for 2 boxes of mortar. Then, we finally get to our own mobilization, labor, and other charges.

The total before we charge any is $620.00 for lab testing and proper repair mortars custom made for your project. Most repair projects price between $695.00 - $1295.00. If there is brick replacement or excessive damage or deterioration, the price may be higher.

 

Click Here to Contact Us: Request an Estimate

 

 

 

 

Get Free Brick Repair Estimates

In most cases, we can quote a price from pictures of the areas to be repaired and a few project details. (Please tell us: Is the home single story/two story, about how many cracks, are any cracks wider than a pencil, are any brick broken, and do you have replacement brick if needed.)

Be sure to include these details, pictures, and contact information (Name, Job Address, Phone) and send it to us at:

 click one of the following links to submit a service request form.

Masonry Repair     Brick Repair/Tuckpointing    

 

 

AMR Labs

We are making brick mortar cracks disappear. - AMR


AMR Brick Repair Mortars

Brick Repair Dallas Fort Worth

Alamo Masonry Repair provides brick repair services in Dallas, Fort Worth, and DFW area. We use AMR Labs which provides other brick and masonry repair products and services including mortar testing and mortar color matching.

Many contractors and individuals across the U.S. use AMR services to Analyze Mortars and Custom Match Tuckpointing Mortars for them.

You can save money using AMR Pre-Matched Mortars. Pre-Matched Mortars make Brick Repair easy and affordable. AMR does the hard part for you. We analyze and match the mortar type and color. All you need to do is inject it into the mortar joints and tool it. It's that easy.

It is very important to use tuckpoint mortars when performing masonry repairs.

AMR Tuckpointing Mortars are specifically designed for performing brick and masonry repairs unlike the many other types of mortar mixes available.

For more information about Tuck Point Mortars or purchasing information, follow this link: 

Tuck-Point Mortars

For more information about Mortar Analysis and Custom Mortar Matching, follow this link: 

Certified Mortar Matching

For more information about Pre-Matched Mortar, follow this link: 

Pre-Matched Mortar

AMR Mortars are the only way to complete a proper brick repair/tuck point project. We produce a variety of Mortars, and mortar services. For more information about AMR Mortars click this link.

 

 Brick Repair Kits and other Products. (click here)

Brick Repair Kit - Fire-Box Repair Kit - "Liquid Brick" Repair Kit

 

 

Alamo Masonry Brick Repair provides Masonry Repair and Repointing services full time in: Dallas, Fort Worth, Irving, Plano, Carrollton, Lewisville, Grand Prairie, Flower Mound, North Richland Hills, Arlington, Benbrook, Crowley, Burleson, Cleburne, Granbury, Johnson County, and the surrounding DFW area. We also have affiliates in Houston, Austin, San Antonio, and other metro areas across the US.

 


Masonry Repair DIY

Do-It-Yourself Brick Repair/Tuckpointing

DIY Brick Repair

Get The Brick Repair Guide now and learn step-by-step how easy Brick Repair can be.

Only $25.00

Click here for more information about the Brick Repair Guide.

 


Fort Worth & Arlington -  Dallas

 

 

 

 

Copyright 2007 James R. Nech/Alamo Masonry. ALL RIGHTS RESERVED

View Our Online Price Guide

Site Map

 SEO Book performed by SEO Assistants

Accounting | SEO